Pads, aprons, add-ons
Concrete Flatwork in Homer Glen
Pads and slabs at grade that sit flat, shed water and crack along the lines we cut for them.
Small Slabs Still Need a Plan
Flatwork is the catch-all: a pad for the shed, a landing for the AC unit, an apron in front of the garage door, an extension that widens a patio or a driveway. These jobs look simple, and that is exactly why they get rushed. A crew skips the base, forgets the pitch and cuts no joints because the slab is only ten feet across. A year later the pad has tipped toward the house and a crack runs corner to corner. We treat a four-by-six pad with the same checklist as a full driveway. Dig to firm soil. Add crushed stone and compact it. Set forms to a measured fall so water runs off the edge you choose. Place reinforcement where the slab will carry weight. Then finish it, cut joints at the right spacing, and keep the surface damp while it cures. On clay-heavy lots like the ones across Homer Glen, that base step matters more than anywhere. The result is a slab that stays where it was poured and looks the same in five years as it did the week the forms came off.
What a Flatwork Job Covers
Every pad and slab gets these pieces, whatever the size.
Layout and measuring
Footprint marked, square checked and height set against the house, the drive or the lawn around it.
Excavation
Topsoil and soft ground removed until we reach something firm enough to build on.
Compacted stone base
Crushed stone placed and compacted in layers, deeper where the soil is wet clay.
Forms set to fall
A small, deliberate tilt that keeps rain moving toward the grass.
Reinforcement
Steel placed where the slab carries weight, such as an equipment pad or a garage apron.
Finish of your choice
Broomed for footing outdoors, or troweled slick where a shed or smoker will sit.
Control joints
Cut at spacing matched to the slab size so cracking follows a straight, planned line.
Curing and cleanup
Kept wet early on, then boards stripped and dirt pushed back along each side.
How a Flatwork Pour Runs
Call with the size and the use
A shed pad, an AC landing, a slab extension. Tell us the rough dimensions and what will sit on it, and we will talk about thickness and finish right away.
Measure and price
We check grade, access and what is in the way, then give you a written price with base depth, thickness, steel and finish listed out.
Dig, pour, cut, cure
Excavation and base on the first visit, the pour once forms check out, joints cut while the concrete is young, and cleanup after it cures.
Why Small Jobs Get Full Attention
Same checklist as a driveway
Base, pitch, steel and joints on every slab. Size does not change the standard.
Joints you can see on paper
We show you the joint layout before the pour so nothing about the lines surprises you.
Edges left tidy
Forms out, soil backfilled along the slab and the scraps hauled away.
- Compacted stone base
- Measured fall
- Joints cut on time
- Written line-item price
Need a Pad or a Slab Extension?
Give us the dimensions and what it will hold. We will tell you the thickness, the base and the price range while you are on the phone.